Sony Handycam DCR-VX2100E Operating Instructions Manual page 61

Using special effects – Digital
effect
(1) In standby or recording mode, press
DIGITAL EFFECT. The digital effect
indicator appears.
(2) Turn the SEL/PUSH EXEC dial to select the
desired digital effect mode.
The digital effect indicator changes as
follows:
STILL y FLASH y LUMI. y TRAIL
y OLD MOVIE
(3) Press the SEL/PUSH EXEC dial. The
indicator lights up and the bar appears. In
STILL and LUMI. modes, the still image is
stored in memory.
(4) Turn the SEL/PUSH EXEC dial to adjust
the effect.
Items to be adjusted
STILL The rate of the still image you want to
superimpose on the moving picture
FLASH The interval of flash motion
LUMI. The colour scheme of the area in the
still image which is to be swapped
with a moving picture
TRAIL The time until the incidental image
vanishes
OLD MOVIE No adjustment necessary
The longer the bar on the screen, the stronger
the digital effect. The bar appears in the
following modes: STILL, FLASH, LUMI. and
TRAIL.
1
DIGITAL
EFFECT
2
LUMI.
(1)
(2)
y y
(3)
(4)
3
4
y y
LUMI.
61