Sony Handycam DCR-VX2100E Operating Instructions Manual page 74

Adjusting the white balance
Notes on white balance
•When you shoot with studio lighting or
video lighting, use the n (indoor) mode.
•When you shoot with fluorescent lighting,
readjust the white balance using the
push white balance) mode , or use the
automatic white balance mode. If you use the
n (indoor) mode, white balance may not be
adjusted appropriately.
Shooting when lighting conditions have
changed
•When lighting conditions have changed,
readjust the white balance while the
camcorder is in standby mode.
•In automatic white balance mode, point your
camcorder at a white subject for about 10
seconds after setting the POWER switch to
CAMERA to get a better adjustment when:
– You detach the battery for replacement.
– You bring your camcorder outdoors from
the interior of a house, or vice versa.
If the indicator does not stop flashing
after you press the SEL/PUSH EXEC dial
The white balance cannot be set. Use the
automatic white balance mode.
74
(one-
n
n