Recording An Image From A Tape As A Still Image - Sony Handycam DCR-VX2100E Operating Instructions Manual

Recording an image
from a tape as a still
image
Your camcorder can read moving picture data
recorded on a tape and record it as a still
image on a "Memory Stick." Your camcorder
can also take in moving picture data through
the input connector and record it as a still
image on a "Memory Stick."
Before operation
Insert a recorded tape and a "Memory Stick"
into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press N. The picture recorded on the tape
is played back.
(3) Keep pressing PHOTO lightly until the
picture from the tape freezes. "CAPTURE"
appears on the LCD screen or in the
viewfinder. Recording does not start yet.
(4) Press PHOTO deeper. The image displayed
on the screen will be recorded on a
"Memory Stick." Recording is complete
when the bar scroll indicator disappears.
2
REW PLAY
3
PHOTO
(1)
(2)
(3)
(4)
FF
4
CAPTURE
N
1
POWER
PHOTO
187