Viewing The Recording On Tv - Sony Handycam DCR-VX2100E Operating Instructions Manual

Viewing the
recording on TV
Connect your camcorder to your TV or VCR
with the A/V connecting cable supplied with
your camcorder to watch the playback picture
on the TV screen. You can operate the video
control buttons in the same way as when you
monitor playback pictures on the LCD screen.
When monitoring the playback picture on the
TV screen, we recommend that you power
your camcorder from the wall socket using the
AC Adaptor (p. 18). Refer to the operating
instructions of your TV or VCR.
Open the jack cover. Connect your camcorder
to the TV using the A/V connecting cable
supplied with your camcorder. Then, set the
TV/VCR selector on the TV to VCR.
: Signal flow/
If your TV is connected to a
VCR
Connect your camcorder to the line input on
the VCR by using the A/V connecting cable
supplied with your camcorder. Set the input
selector on the VCR to LINE.
If your TV or VCR is a
monaural type
Connect the yellow plug of the A/V
connecting cable to the video input jack and
only the white plug to the audio input jack on
the VCR or the TV. The red plugs are not used.
46
S VIDEO
VIDEO
AUDIO L/R
(optional)/
Yellow/
AUDIO
L/R
White/
IN
S VIDEO
VIDEO
AUDIO
Red/