Sony Handycam DCR-VX2100E Operating Instructions Manual page 186

Superimposing a still image in
a "Memory Stick" on a moving
picture – MEMORY MIX
To change the still image to be
superimposed
Do either of the following:
– Press MEMORY+/– after step 6.
– Press the SEL/PUSH EXEC dial after step 6,
and repeat the procedure from step 3 (except
M. OVERLAP).
To change the mode setting
Press SEL/PUSH EXEC dial after step 6, and
repeat the procedure from step 4 (except M.
OVERLAP).
To cancel MEMORY MIX
Press MEMORY MIX.
During recording
You cannot change the mode setting.
If a still image to be superimposed has lots
of white areas
The thumbnail image may not be displayed
clearly.
Image data modified with personal
computers or shot with other equipment
You may not be able to play them back with
your camcorder.
186