Editing; Dubbing A Tape - Sony Handycam DCR-VX2100 Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
Before a dubbing
Set DISPLAY to LCD in the menu settings. (Default setting is LCD.)
Set the input selector on the VCR to LINE, if available.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
(2) Set the input selector on the VCR to LINE. For details, refer to the operating
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR. For details, refer to the operating instructions of
When you have finished dubbing the tape
Press x on both your camcorder and the VCR.
Be sure to clear the indicators from the screen
If they are displayed, press the following buttons so as not to record the indicators on
the dubbed tape:
•The DISPLAY button
•The DATA CODE button
•The SEARCH MODE button on the Remote Commander
You can edit on VCRs that support the following systems
8 mm,
Betamax,
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white plug to the audio input jack on the VCR or the TV. The red plugs are not used.
74
the recorded tape into your camcorder.
instructions of the VCR.
the VCR.
AUDIO
L/R
A/V connecting cable
: Signal flow
Hi8, Digital8,
ED Betamax,
S VIDEO
S video cable (optional)
VIDEO
(supplied)
VHS, S-VHS,
mini DV,
IN
S VIDEO
VIDEO
AUDIO
VHSC,
DV or MICROMV
S-VHSC,