Erasing All Programs - Sony Handycam DCR-VX2100 Operating Instructions Manual

Dubbing only desired scenes – Digital program editing
Erasing the last program
To change the end of the last program, delete the CUT-OUT mark.
To erase the whole program, delete both the CUT-IN and CUT-OUT marks.
(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial. The last set
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial and the
To cancel erasing
Select RETURN in step 2, then press the SEL/PUSH EXEC dial.

Erasing all programs

(1) Select VIDEO EDIT in the menu settings. Turn the SEL/PUSH EXEC dial to select
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial and the
To cancel erasing all programs
Select RETURN in step 2, then press the SEL/PUSH EXEC dial.
To cancel a program you have set
Press MENU.
The program is stored in memory until the tape is ejected.
86
program mark flashes.
setting is canceled.
ERASE ALL, then press the dial. All the program marks flash.
settings are canceled.