Sony Handycam DCR-VX2100 Operating Instructions Manual page 85

Dubbing only desired scenes – Digital program editing
(6) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander.
The CUT-IN point of the first program is set, and the top part of the program mark
changes to light blue.
(7) Search for the end of the first scene you want to insert using the video operating
buttons, then pause playback (p. 30).
(8) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander.
The CUT-OUT point of the first program is set, then the bottom part of the program
mark changes to light blue.
(9) Repeat steps 5 to 8, then set the program.
When the program is set, the program mark changes to light blue.
You can set a maximum of 20 programs.
7
STOP REW PLAY
On a blank portion of the tape
You cannot set CUT-IN or CUT-OUT on a blank portion of the tape.
Note
The total time of the programs is indicated on the LCD screen or in the viewfinder, however,
if the time code on the tape is not continuous, the time may not be indicated properly.
6
FF PAUSE
8,9
V I DEO ED I T 0:09:07:06
MARK 2 I N
UNDO
ERASE AL L
START
TOTAL 0:00:12:13
SCENE 1
[ MENU ] : END
V I DEO ED I T 0:08:55:06
MARK 1 OUT
UNDO
ERASE AL L
START
TOTAL 0:00:00:00
SCENE 0
[ MENU ] : END
V I DEO ED I T 0:10:01:23
MARK 4 I N
UNDO
ERASE AL L
START
TOTAL 0:00:47:12
SCENE 3
[ MENU ] : END
85