Audio Dubbing - Sony Handycam DCR-VX2100 Operating Instructions Manual

Audio dubbing

You can record an audio sound to add to the original sound on a tape by connecting
audio equipment or a microphone. If you connect audio equipment, you can add sound
to your recorded tape by specifying the starting and ending points. The original sound
will not be erased. You can also use the Remote Commander for this operation.
Connecting the microphone with the MIC jack
MIC (PLUG IN POWER)
: Signal flow
You can check the picture on TV by connecting with the video jack. You cannot monitor
the additional sound by the speaker. Use the headphone jack.
Connecting the audio equipment with the MIC jack
MIC
Set the MIC/LINE
switch to LINE.
: Signal flow
Microphone (optional)
LINE
MIC LINE
Set the MIC/LINE
switch to MIC.
Audio equipment
(optional)
MIC (PLUG IN
LINE OUT
POWER)
L R
95