Before You Begin; Preinitialization - HP StorageWorks NAS e7000 V2 Quick Start Manual

Before You Begin

This chapter describes the preinitialization and configuration tasks required for
the HP StorageWorks NAS e7000 v2.

Preinitialization

Before beginning the installation process, verify that the hardware installation is
complete. Verify that the NAS e7000 v2 is completely installed in the rack and
that all cables and cords are connected except for the fiber cables attached to the
SAN switches. The setup utility documented here and in the next section only
provide basic setup for the network components of the NAS e7000 v2.
Note:
the quick reference and rack installation guide included in the shipping carton.
NAS e7000 v2 Quick Start Guide
If you need assistance with rack installation or hardware connections, refer to
2
31