HP StorageWorks NAS e7000 V2 Quick Start Manual page 39

Figure 7: RapidLaunch search screen
9. All the NAS devices found on the network are displayed as shown in
Note:
network. You may refresh the device list manually by selecting the Refresh button.
NAS e7000 v2 Quick Start Guide
The NAS device will be displayed in the device discovery portion of the
screen. It may take several minutes for the NAS device to be found on the
network. The address range may need to be adjusted to find the device. To
adjust the range, stop the discovery and left click on the search range cell and
reset the search range to match with the interface ip address that the NAS
device is attached to.
The RapidLaunch utility will refresh periodically looking for new devices on the
Configuration Setup
Figure 8.
39