HP StorageWorks NAS e7000 V2 Quick Start Manual page 33

Table 2: Configuration Information
Part A: To Be completed for DHCP and non-DHCP configurations
Server Host Name:
Integrated Lights-Out Name:
Note: If NIC teaming is to be implemented, determine which ports will be teamed.
Configure these Ethernet ports for DHCP protocol. For more information, refer to the
Ethernet teaming features and procedures section of administrative procedures in the
administration guide.
Part B: To be completed for non-DHCP configurations only
DNS Servers
Integrated Lights-Out Eth port
* The default NAS e7000 v2 has three Ethernet ports available for network
connectivity. Disable ports that will not be used. Each Ethernet port must be
configured with a separate subnet.
Figure 6 and Table 3 in Chapter 3 illustrate the Nic Port assignments mentioned
here.
P
art C: SNMP Information (optional)
Trap Destination (IP Address)
Manager Client:
Management Traps Community
String:
System Management
Community String:
NAS e7000 v2 Quick Start Guide
1
2
3
NAS NIC Port*
Eth 0 10/100
Eth 1 10/100
Eth 2 10/100/1000
Integrated Integrated Lights-Out Password:
Lights-Out
Default User:
IP Address
IP Address Subnet Mask
Before You Begin
Gateway
Address
33