Configuring The Server On The Network; Before You Begin; Server Configuration Worksheet - HP DL320s - ProLiant 9TB SATA Storage Server NAS User Manual

Configuring the server on the network

Before you begin

When first powering on the storage server you need to have some configuration data readily available
to complete the
collected to initialize the storage server.
NOTE:
Ensure you are logged into the HP ProLiant Storage Server as a local or domain administrator.
Table 5 Server configuration worksheet
Configuration Worksheet
Administrative Identity
User name
User password
Alert E-mail Notification
E-mail address alert sent to
E-mail address alert sent from
SMTP server name or IP
address
SNMP Settings (to be completed only if needed)
Contact person
System location
Community name No. 1
Trap destination No. 1
Community name No. 2
Trap destination No. 2
Network Interfaces (to be completed for non-DHCP configurations)
Local area connection 1
IP address
Subnet mask
Default gateway
Rapid Startup Wizard. Complete the
Change system administrator's user name, which is set by default to
administrator.
Change system administrator's password, which is set by default
to hpinvent.
E-mail address for critical, warning, or informational messages
about server status.
Must be a valid, well-formed e-mail address that will appear as the
sender of server status e-mail alerts.
Must be an e-mail server on your network that supports the Simple
Mail Transfer Protocol (SMTP).
System administrator for the storage server. The contact and location
will be provided to any SNMP management computer that requests
them.
Any text string, such as a location or phone number. For example,
Floor #3, Financial Services Bldg.
The community name is used for network authentication when
sending outgoing SNMP messages.
The IP address of a management computer that will receive SNMP
messages from the storage server using the above community name.
Same as above.
Same as above.
A local area connection is automatically created for each network
adapter that is detected.
An Internet Protocol (IP) address is assigned to the server. If it is
not automatically assigned, enter the IP address that you want to
assign to this server.
A mask is used to determine what subnet an IP address belongs to.
The gateway in a network that the network adapter will use to
access all other networks.
Server configuration worksheet
HP ProLiant Storage Server
and use the data
25