Sony Handycam DCR-PC101 Operating Instructions Manual page 95

Dubbing only desired scenes – Digital program editing (on tapes)
Erasing the program you have set
Erase OUT mark first, and then IN mark of the last program.
(1) Press UNDO.
(2) Press ERASE 1 MARK. The last set program mark flashes, then DELETE ?
appears.
(3) Press EXEC. The last set program is deleted.
To cancel erasing
Press CANCEL in step 3.
Erasing all programs
(1) Press MENU, then select VIDEO EDIT in , then press EXEC (p. 192).
(2) Press r/R to select TAPE, then press EXEC.
(3) Press UNDO.
(4) Press ERASE ALL. All the set program marks flash, then DELETE ? appears.
(5) Press EXEC. All the set programs are deleted.
To cancel erasing all programs
Press CANCEL in step 5.
To finish making programs
Press END.
The program is stored in memory until the tape is ejected.
Note
You cannot operate recording during the Digital program editing.
On a blank portion of the tape
You cannot set IN or OUT.
If there is a blank portion between the IN point and the OUT point on the tape
The time code may not be displayed correctly.
95