If You Cannot Install The Usb Driver - Sony Handycam DCR-PC101 Operating Instructions Manual

Connecting to your computer with USB port – For Windows users

If you cannot install the USB driver

The USB driver has been registered incorrectly as your computer was connected to your
camcorder before installation of the USB driver was completed. Perform the following
procedure to correctly install the USB driver.
Viewing images recorded on a tape
Step 1: Uninstall the incorrect USB driver
1 Turn on your computer and allow Windows to load.
2 Connect the AC power adaptor to your camcorder, and set the POWER switch
to VCR.
3 Connect the
computer using the supplied USB cable.
4 Open your computer's "Device Manager".
Windows XP Home Edition/Professional:
Select "Start" t "Control Panel" t "System" t "Hardware", and click the
"Device manager" button.
If there is no "System" inside "Pick a category" after clicking "Control Panel",
click "Switch to classic view" instead.
Windows 2000 Professional:
Select "My Computer" t "Control Panel" t "System" t "Hardware" tab,
and click the "Device Manager" button.
Windows 98 SE, Windows Me:
Select "My Computer" t "Control Panel" t "System", and click "Device
Manager" button.
5 Select and delete the underlined devices on the next page.
(USB) jack on your camcorder with the USB port on your
171