Audio Dubbing - Sony Handycam DCR-PC101 Operating Instructions Manual

Audio dubbing

You can record additional audio to the original sound on a tape by connecting audio
equipment or a microphone. If you connect the audio equipment, you can add sound to
your tape already recorded in the 12-bit mode by specifying starting and ending points.
The original sound will not be erased.
Select one of the following connections to add additional audio.
Connecting the microphone with the MIC jack
You can check the recorded picture and sound by connecting the A/V jack to a TV.
The recorded sound is not output from a speaker. Check the sound by using the
headphones or TV.
Connecting the microphone to the intelligent accessory shoe
102
Microphone
(optional)
: Signal flow
Intelligent accessory shoe
MIC (PLUG IN
POWER)
Microphone (optional)