Sony Handycam DCR-PC101 Operating Instructions Manual page 145

Recording edited pictures from a tape as a moving picture
– Digital program editing (on "Memory Stick"s)
Performing the program (Dubbing a "Memory Stick")
(1) Press MENU, then select VIDEO EDIT in
(2) Press r/R to select MEMORY, then press EXEC.
(3) Press START.
(4) Press EXEC.
Your camcorder searches for the beginning of the first program, then starts
dubbing.
The program mark flashes.
The SEARCH indicator appears during search, the EDITING indicator appears
during writing of data on your camcorder, and REC appears during dubbing
on the screen.
The program mark changes to light blue after dubbing is complete.
When the dubbing ends, your camcorder automatically stops.
To stop dubbing
Press CANCEL.
The program you made is recorded on a "Memory Stick" up to the place where you
pressed CANCEL.
To end the Digital program editing function
Your camcorder stops when the dubbing ends. Then the display returns to VIDEO
EDIT in the menu settings.
Press END to end the program editing function.
When the program has not been set
You cannot press START.
When the available recording time of "Memory Stick" is not enough
LOW MEMORY appears on the screen. However, you can record pictures up to the
time indicated.
When available recording time is not left on the "Memory Stick"
MEMORY FULL appears.
When the "Memory Stick" is not inserted
NO MEMORY STICK appears.
When the write-protect switch on the "Memory Stick" is set to LOCK
MEMORY STICK LOCKED appears.
, then press EXEC (p. 192).
145