Static Ip Address - D-Link DIR-605 Manual

Wireless n router

Hide thumbs Also See for DIR-605:

Table of Contents

Section 3 - Configuration

subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the

appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.

IP Address:

Enter the IP address assigned by your ISP.

Subnet Mask:

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

Default Gateway:

DNS Servers:

The DNS server information will be supplied by your ISP (Internet Service Provider.)

MTU:

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default

MTU.

The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended

MAC Address

the Internet port's MAC address with the MAC address of your Ethernet card.

D-Link DIR-605 User Manual

Static IP Address

button to replace

Table of Contents