Static Ip Address - D-Link DIR-615/T User Manual

Section 3 - Coniguration
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP
address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields
must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The router will not accept an IP address
if it is not in this format.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the subnet mask assigned by your ISP.
Default Gateway:
Enter the gateway assigned by your ISP.
Primary DNS
The primary DNS server information will be supplied by your ISP
Server:
(Internet Service Provider.)
Secondary DNS
The secondary DNS server information will be supplied by your ISP
Server:
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address:
The default MAC address is set to the Internet port's physical interface
MAC address on the broadband router. It is not recommended that you
change the default MAC address unless required by your ISP. You can
use the Clone Your PC's MAC Address button to replace the Internet
port's MAC address with the MAC address of your Ethernet card.
D-Link DIR-615 User Manual

Static IP Address

17