Static Ip Address - D-Link DIR-615 User Manual

Section 3 - Configuration
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP address,
subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Default Gateway:
Enter the Gateway assigned by your ISP.
DNS Servers:
The DNS server information will be supplied
by your ISP (Internet Service Provider.)
MTU:
Maximum Transmission Unit - you may need
to change the MTU for optimal performance
with your specific ISP. 1500 is the default MTU.
MAC Address:
The default MAC Address is set to the Internet
port's physical interface MAC address on the
Broadband Router. It is not recommended that
you change the default MAC address unless
required by your ISP. You can use the Clone
Your PC's MAC Address button to replace
the Internet port's MAC address with the MAC
address of your Ethernet card.
D-Link DIR-615 User Manual

Static IP Address

27