Assign A Static Ip Address - D-Link DIR-808L User Manual

Appendix B - Networking Basics
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step.1
Click on Start.>.Control.Panel.>.Network.and.Internet.>.Network.and.Sharing.Center.
Windows® 7 -
Windows Vista® - Click on Start.>.Control.Panel.>.Network.and.Internet.>.Network.and.Sharing.Center.>.Manage.Network
. . . Connections.
Click on Start.>.Control.Panel.>.Network.Connections.
Windows® XP -
Windows® 2000 - From the desktop, right-click My.Network.Places.>.Properties.
Step.2
Right-click on the Local.Area.Connection which represents your network adapter and select Properties.
Step.3
Highlight Internet.Protocol.(TCP/IP) and click Properties.
Step.4
Click Use.the.following.IP.address and enter an IP address that is on the same subnet as
your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not in use
on the network. Set the default gateway the same as the LAN IP address of your router (I.E.
192.168.0.1).
Set the primary DNS the same as the LAN IP address of your router (192.168.0.1). The
secondary DNS is not required, however you may be required to enter a DNS server by your ISP.
Step.5
Click OK twice to save your settings.
D-Link DIR-808L User Manual

Assign a Static IP address

145