Dhcp Server Settings - D-Link DIR-605 Manual

Section 3 - Configuration
DHCP stands for Dynamic Host Control Protocol. The DIR-605 has a built-in DHCP server. The DHCP Server will automatically
assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to "Obtain an IP Address Automatically. " When you turn your computers on, they will automatically load
the proper TCP/IP settings provided by the DIR-605. The DHCP Server will automatically allocate an unused IP address from
Enable DHCP Check this box to enable the DHCP server on your
Server: router. Uncheck to disable this function.
DHCP IP Address Enter the starting and ending IP addresses for the
Range: DHCP server's IP assignment.
Note: If you statically (manually) assign IP addresses
to your computers or devices, make sure the IP
addresses are outside of this range or you may have
an IP conflict.
Lease Time: The length of time for the IP address lease. Enter
the Lease time in minutes.
NetBIOS The NetBIOS API allows applications on seperate
Announcement: computers to communicate over LAN. The user can
check this option to enable this function.
Learn NetBIOS Each computers in the network have both NetBIOS
from WAN: name and IP address corresponding to the Host name.
The user may simply use the NetBIOS name to log in
router web interface. (The default is "dlinkrouter")
D-Link DIR-605 User Manual

DHCP Server Settings

35