Sony HDCU3100 Operating Instructions Manual page 33

VIDEO/MONITOR menu
Note
Items marked with "a)" are not available on the HDCU3170 in triax transmission mode.
VIDEO/MONITOR
Page name Item
Page No.
<COLOR BAR> 4K/HD-BAR SELECT
V01
SD
BAR-CHARACTER
MOVING
SYMBOL
<BAR CHARACTER> BAR CHARACTER
V02
ALL CLEAR
<DOWNCONVERT> SD ASPECT
V03
NTSC SETUP
Set value
BAR 16:9(100%), BAR 16:9(75%),
SMPTE 16:9(BLACK), SMPTE
16:9(-I/Q), BAR 4:3(100%), BAR
4:3(75%), SMPTE 4:3(BLACK),
SMPTE 4:3(-I/Q), MF-ARIB(75%),
MF-ARIB(100%), MF-ARIB(+I), MF-
SMPTE(-I,Q), MF-SMPTE(75%,Q),
MF-SMPTE(100%,Q), MF-
SMPTE(+I,Q), HD-CUSTOM, SDI
CHECK FIELD, Y-RAMP, Y/C-
RAMP, HD-CUSTOM2
MF-CB MODIFY, EVEN
SLOPE WIDE, NARROW
SOURCE 4K/HD BAR, SD BAR
SELECT When SYSTEM CONFIG menu t
<MULTI FORMAT> page t
SYSTEM is set to 1.001(525):
SMPTE, EIA, FULL, 95%,
NTSC100%, Y/C-RAMP, Y-RAMP
When SYSTEM CONFIG menu t
<MULTI FORMAT> page t
SYSTEM is set to 1.000(625):
SMPTE, EIA, FULL, 95%,
PAL100%, Y/C-RAMP, Y-RAMP
ON, OFF
ON, OFF
TYPE 0, 1, 2
SIZE SMALL, LARGE
SQUEEZE, EDGE CROP,
LETTER BOX
7.5, 0 IRE
Description
Selects the color bars of 4K output/HD output.
Sets the stripe width for multi-format color bar output.
MODIFY: Stripe width adjusted to prevent colors
mixing in 4:3 Edge Crop mode.
EVEN: Stripe width in accordance with standard.
Sets the color difference signal band of the color
bars.
WIDE: Band not limited.
NARROW: Band is limited to prevent ringing.
Selects the color bar signal source for output to SD.
4K/HD BAR: Down converts the 4K/HD color bars
and then outputs it.
SD BAR: Outputs the SD color bars selected in
SELECT.
Selects the SD color bars.
Sets the character superposition on the color bar
signal.
Sets symbol moving on the color bar screen.
Selects the symbol type.
Selects the symbol size.
Sets the character string to be displayed on each of
lines 1 to 16.
Clears all the character strings set for BAR
CHARACTER.
Selects the aspect ratio for SD output.
Sets the NTSC signal setup level.
33