Sony HDCU3100 Operating Instructions Manual page 28

SYSTEM CONFIG
Page name Item
Page No.
<OUTPUT FORMAT2> SDI-I/O4
S08
<OUTPUT FORMAT3> IP-OUT1
S09
Displayed only when
HKCU-SFP30 is installed.
IP-OUT2
Set value
MONITOR C
FORMAT See "Formats settable for the SDI
OUT / SDI I/O connectors"
(page 31).
OETF SDR, HDR OETF
COLOR BT709, BT2020
MONITOR C
FORMAT Output format
OETF SDR, HDR OETF
COLOR BT709, BT2020
SOURCE CAMERA
MONITOR C, M
FORMAT Output format
OETF SDR, HDR OETF
COLOR BT709, BT2020
SOURCE CAMERA
Description
Sets the output for the SDI I/O 4 connector.
Sets whether to add characters to the output signal.
C: Characters are not added.
Note
This is fixed to C.
Sets the output signal format for the SDI I/O 4
connector.
Sets the gamma curve of the video output.
Fixed to SDR when using HDCU3170.
Selects the color space of SDI I/O4 video output.
Fixed to BT709 when using HDCU3170.
BT709: Sets the color output format to BT709.
BT2020: Sets the color output format to BT2020.
Sets the IP OUT1 connector output.
Sets whether to add characters to the output signal.
C: Characters are not added.
Note
This is fixed to C.
Sets the output signal format of the IP OUT1
connector.
Sets the gamma curve of the video output.
Fixed to SDR when using HDCU3170.
Selects the color space of IP OUT1 video output.
Fixed to BT709 when using HDCU3170.
BT709: Sets the color output format to BT709.
BT2020: Sets the color output format to BT2020.
Selects the signal source to output.
Sets the IP OUT2 connector output.
Sets whether to add characters to the output signal.
C: Characters are not added.
M: Characters are added.
Sets the output signal format of the IP OUT2
connector.
Sets the gamma curve of the video output.
Fixed to SDR when using HDCU3170.
Selects the color space of IP OUT2 video output.
Fixed to BT709 when using HDCU3170.
BT709: Sets the color output format to BT709.
BT2020: Sets the color output format to BT2020.
Selects the signal source to output.
28