Mounting and mounting
limitations
Environmental conditions
Manual control
Mechanical limitation of
angular rotation
Configuration and
maintenance interface
20 / 44
Siemens
Building Technologies
4
Electrical and mechanical installation
4.1
Mechanical installation / mounting
For mounting and limitations on mounting (location / position), consulting the
mounting instruction M3547 ([2]) is mandatory.
The permissible ambient temperature and ambient humidity must be observed.
The actuator may only be manually operated when separated from power
supply.
If required, the angular rotation can be set by appropriate adjustment of the
adjusting screw.
Connection of PC tool ACS931 / ACS941 to G..B181.1E/KN
1
PC (with ACS931 or ACS941)
2
G..B181.1E/KN
3
Strain release strip
Connection of handheld tool AST20 to G..B181.1E/KN
1
AST20
2
G..B181.1E/KN
VAV compact controller KNX/PL-Link G..B181.1E/KN
1
AST11
1
2
3
2
3
CE1P3547en
2017-03-23