Objectives Of This Basic Documentation; Abbreviations And Naming Conventions; Abbreviations; Naming Conventions - Siemens OpenAir G..B181.1E/KN Series Technical Basics

6/44
Siemens
Building Technologies
∂ On the intranet (Siemens employees only) at
https://workspace.sbt.siemens.com/content/00001123/default.aspx
∂ From the Siemens branch office near you
system supplier
∂ From the support team at headquarters
if there is no local point of contact
Siemens assumes no liability to the extent allowed under the law for any losses
resulting from a failure to comply with the aforementioned points or for the
improper compliance of the same.
1.3

Objectives of this basic documentation

This basic documentation covers the networked VAV compact controllers
GDB181.1E/KN and GLB181.1E/KN. These devices are designed for controlling
variable or constant air volume flows.
This document is structured along the according workflow. Following a description
of the devices and their application, mounting, engineering, and commissioning are
covered. A references section lists technical data, parameters, and data points.
1.4

Abbreviations and naming conventions

1.4.1

Abbreviations

Abbreviation Description
Desigo TRA Total Room Automation (Part of Desigo V5)
ABT Automation Building Tool – part of Desigo XWP
SSA Setup and Service Assistant
LTE Logical Tag Extended (KNX Mode)
USS Universal Serial Interface Protocol (industry automation protocol)
VSD Variable Speed Drive
1.4.2

Naming conventions

Throughout this documentation the term "VAV compact controller(s)" refers to the
GDB181.1E/KN as well as to the GLB181.1E/KN.
VAV compact controller KNX/PL-Link G..B181.1E/KN
www.siemens.com/sbt
fieldsupport-zug.ch.sbt@siemens.com
or from your
CE1P3547en
2017-03-23