Version Summary - Siemens OpenAir G..B181.1E/KN Series Technical Basics

Version identification
Compatibility
Siemens
Building Technologies
2.1.3

Version summary

Series identification and actuator data can be found in the top right corner of the
product label. As of Series F, the device data is also stored in a DMC (data matrix
code) in the top right corner. It can be read out with any QR Code / DMC scanner
or the Scan-to-HIT app available at ([7] resp. [8]).
Version Series E
Identification
∂ Communication over
Desigo PL-Link or
KNX (LTE- and S-
mode).
∂ New differential
pressure sensor.
∂ Simultaneous
feedback of actual
Features
values of damper
position and air
volume flow.
∂ Optional adaptive
opening range
measurement
(adaptive positioning).
∂ HMI with push button
and LED.
VAV Compact Controllers series G are designed for using ETS device profile v2.x,
however ETS device profile v1.x is supported for backward compatibility reasons.
Version
Production period 10/2011 – 03/2014
FW version 4.16
ETS profile v1.x supported
ETS profile v2.x not supported
VAV compact controller KNX/PL-Link G..B181.1E/KN
Series F
∂ Stability
Improvements
∂ Support for DMC
(data matrix code)
based workflows
Series E Series F
03/2014 – 01/2017
4.18
supported
not supported
Series G
∂ Improved ETS and
Desigo ABT
interfaces
Series G
01/2017
4.24
supported
supported
11 / 44
CE1P3547en
2017-03-23