Electrical And Mechanical Installation; Mechanical Installation / Mounting - Siemens OpenAir G B181.1E/3 Series Technical Basics

Mounting and mounting
limitations
Environmental conditions
Manual control
Mechanical limitation of
angular rotation
Strain release strip
Connection to PC with
AST11
Connection to AST10
Siemens
Building Technologies
4

Electrical and mechanical installation

4.1

Mechanical installation / mounting

For mounting and limitations on mounting (location / position), consulting the
mounting instruction M3544 ([2]) or M3545 ([4]) is mandatory.
The permissible ambient temperature and ambient humidity must be observed.
The actuator may only be manually operated when separated from power
supply.
If required, the angular rotation can be set by appropriate adjustment of the
adjusting screw.
When using the connecting cable with the 6- or 7-pin plug, attach the strain relief
strip at the cable to the VAV compact and modular controllers as shown in the
following illustration.
1
AST11
1 PC (with ACS931 or ACS941)
2 G..B181.1E/3
3 ASV181.1E/3
1
1 AST10
2 G..B181.1E/3
3 G..B181.1E/KN
VAV compact controller G..B181.1E/3 | VAV modular controller ASV181.1E/3
2
5
4 Connection to AST11
5 Strain relief strip
2
6
5
4 ASV181.1E/3
5 Connection to AST10
6 Strain relief strip
3
4
3
4
5
19 / 42
CE1P3544en
2016-02-26