VAV compact controller
KNX/PL-Link
Tools for
commissioning and
service
8 / 44
Siemens
Building Technologies
2
Device
2.1
Type summary
2.1.1
Device variants, tools and accessories
GDB181.1E/KN (5 Nm)
Datasheet: A6V10631836
Datasheet: N5852
VAV compact controller KNX/PL-Link G..B181.1E/KN
GLB181.1E/KN (10 Nm)
AST10
The handheld tool AST20 can be
used to set the VAV and actuator
parameters and supports access
levels for service technicians and
OEMs.
ACS941 / AST11
The PC software for service
ACS941 can be used for setting
and reading a certain set of device
parameters (values set by OEM
and current configuration, and
actual values), cf. section 9.2.
For connecting to a PC with
RS232 interface, an interface
converter AST11 is required.
CE1P3547en
2017-03-23