Table of Contents
Advertisement
SDP3B FlashDisk Product Manual
5.0 ATA Drive Register Set Definition and Protocol
The SDP3B FlashDisk can be configured as a high
performance I/O device through:
a.) Standard PC-AT disk I/O address spaces
1F0h-1F7h, 3F6h-3F7h (primary); 170h-
177h, 376h-377h (secondary) with IRQ 14
(or other available IRQ).
b.) Any system decoded 16 byte I/O block
using any available IRQ.
c.) Memory space.
Table 5-1 I/O Configurations
Config
IO or
Index
Memory
0
Memory
1
2
2
3
3
46
Standard Configurations
Address
0-F, 400-7FF
I/O
XX0-XXF
I/O
1F0-1F7, 3F6-3F7
I/O
1F0-1F7, 3F6-3F7
I/O
170-177, 376-377
I/O
170-177, 376-377
SanDisk SDP3B FlashDisk Product Manual © 1998 SANDISK CORPORATION
The communication to or from the
FlashDisk is done using the Task File registers
which provide all the necessary registers for
control and status information. The PCMCIA
interface connects peripherals to the host using
four register mapping methods. The following is a
detailed description of these methods:
Drive #
Description
0
Memory Mapped
0
I/O Mapped 16 Contiguous Registers
0
Primary I/O Mapped Drive 0
1
Primary I/O Mapped Drive 1
0
Secondary I/O Mapped Drive 0
1
Secondary I/O Mapped Drive 1
SDP3B
Advertisement
Table of Contents
