Step 2: Charging The Battery Pack - Sony Handycam DCR-DVD150E Operating Manual

Step 2: Charging the battery pack

Battery
Jack cover
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 117) after
attaching it to your camcorder.
b Notes
• Your camcorder operates only with
"InfoLITHIUM" battery pack (H series).
1
Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
2
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
3
Connect the AC Adaptor to the
DC IN jack of your camcorder.
Open the jack cover, and connect the
DC plug of the AC Adaptor.
Match the v mark on the DC plug with
the v mark on your camcorder.
20
AC Adaptor
DC plug
DC IN jack
CHG (charge) lamp
Power cord (mains lead)
4
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
The CHG (charge) lamp lights up and
charging starts.
5
The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.
b Notes
• Disconnect the AC Adaptor from the DC IN
jack holding both the camcorder and the DC
plug.
POWER switch
To the wall outlet
(wall socket)