Playing The Images On A Tv - Sony Handycam DCR-DVD150E Operating Manual

Playing the images on a TV

Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable 1
or an A/V connecting cable with S VIDEO 2. Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this operation (p. 20). Refer also to the instruction
manuals supplied with the devices to be connected.
A/V Remote
Connector
: Signal flow
1 A/V connecting cable (supplied)
Connect to the input jack of the other device.
2 A/V connecting cable with S VIDEO (sold
separately)
When connecting to the other device via the S
VIDEO jack, by using an A/V connecting cable
with S VIDEO (sold separately), higher quality
images can be produced than with an A/V
connecting cable. Connect the white and red
plugs (left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting
cable with S VIDEO (sold separately). The
yellow plug connection is not necessary.
Connecting only the S VIDEO plug will not
output audio.
Device without
S VIDEO jack
IN
VIDEO
(Yellow)
(White)
AUDIO
(Red)
When your TV is connected to a VCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1, VIDEO 2, etc.),
if the VCR has an input selector.
To set the aspect ratio according to
the connected TV (16:9/4:3)
Change the setting according to the screen
aspect ratio of the TV you will view images
on.
1 Turn on your camcorder.
2 Touch
t [OUTPUT SETTINGS] t [TV TYPE]
t [16:9] or [4:3] t
Device with
S VIDEO jack
IN
S VIDEO
VIDEO
(White)
AUDIO
(Red)
VCRs or TVs
(HOME) t
(SETTINGS)
.
Continued ,
45