Sony DCM-M1 Operating Instructions Manual page 93

Minidisc av recorder
Hide thumbs Also See for DCM-M1:
Table of Contents

Advertisement

Changing the menu settings
Icon/item
Mode
AVLS
z OFF
BEEP
z ON
REC LAMP
z ON
COMMANDER
z ON
PICTURE IN
z OFF
PICTURE*
AUTO DATE
z OFF
TITLE
10sec. TRACK*
z OFF
START/STOP*
z NORMAL
* You cannot select the item in the INTERVIEW mode.
Notes on "10sec. TRACK"
•The every track made with the "10sec. TRACK" function has the same recorded time
as the first track of the recording.
•If you record for long time in one recording with 10sec. TRACK set to ON, it may take
a maximum of 16 minutes to write in the disc after recording.
Note on REC LAMP
When REC LAMP is set to ON, the red camera-recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend you set
REC LAMP to OFF.
Meaning
The sound volume is as adjusted.
ON
To activate the Automatic Volume Limiter System when
the volume is turned up. This works on the headphones
and speaker.
OFF
To cancel the beep sound.
To output the beep when you start/stop recording or
press other operation buttons.
OFF
To turn off the camera recording lamp so that person is
not aware of the recording.
To turn on the camera recording lamp at the front of the
camcorder.
OFF
To deactivate the Remote Commander to avoid remote
control misoperation caused by other VCR's remote
control.
To activate the Remote Commander supplied with your
camcorder.
To not display the last track index image during
recording standby.
NORMAL
To display the last track index image during recording
standby.
To not make the title track of recording date.
ON
The camcorder automatically makes the title track of
recording date by day of recording. You can locate this
track by jump.
Your camcorder does not renew the track until the
recording stops. The entire recording makes one track.
ON
Your camcorder makes new tracks of 10 seconds while
recording a movie. (The last track will be longer than 6
seconds but shorter than 16 seconds.)
To start recording by pressing START/STOP and stop
recording by pressing it again.
ANTI GROUND
To record only while you are pressing START/STOP to
avoid recording the ground by mistake.
93

Advertisement

Table of Contents
loading

Table of Contents