Sony DCM-M1 Operating Instructions Manual page 102

Viewing on the computer display
Net mask
Changes in the order of 255 - 254 - 252 - 248 - 240 - 224 - 192 - 128 - 0 - 255.
Using the DHCP server of the network
You can set the address automatically. Touch AUTO in step 3 and proceed to step 5.
Step 2 Connecting the camcorder to the computer
Use a commercially available cross cable.
(1) Connect the connecting cable to the camcorder.
(2) Connect the camcorder to the computer using a commercially available cross
Notes
•Turn off the power of the camcorder and computer before connection.
•You cannot shut the battery lid when the cross cable is connected.
Note on the type of the computer's network terminal
Either an exclusive 10BASE-T terminal or a 10BASE-T/100BASE-T compatible terminal
can be connected.
102
cable.
to 10BASE-T
terminal
to network
terminal