Sony DCM-M1 Operating Instructions Manual page 84

Minidisc av recorder
Hide thumbs Also See for DCM-M1:
Table of Contents

Advertisement

Switching the tracks with special effects
(6) Touch PREVIEW.
(7) Confirm the playback, then touch BACK.
(8) Touch EXEC.
(9) Touch FINISH.
To not apply the scene transition effect
Select EFFECT OFF.
To operate the menu
You can use the control dial.
To cancel setting the effects
Touch CANCEL. All the settings you made so far is canceled.
Notes on cross-fade, cross-wipe and cross-dissolve effects
•Select the track which appears first when you set these effects.
•These effects are available only when you select a track followed by either a movie or
a photo track.
•These effects are canceled:
- if you set an IN-effect to its succeeding track.
- if you move the track.
- if you move or copy other track between the tracks.
Notes on wipe and cross-wipe effects
Touch the desired direction to switch.
You cannot set switching effects if:
•the disc is protected.
•the track is protected.
The switching effects will not be played back on:
•picture-in-picture, 2-picture and 9 FRAME SEQUENCE (including enlarged picture)
displays
•a photo set to play for one second
•a very short movie
To continue setting switching effects
Touch CONTINUE in step 9.
84
The last 5 seconds of the track before the selected track, the selected track itself
and the first 5 seconds of the next track will be played back with the selected
effects.
BACK
After the PLEASE WAIT message, which appears while the change is written
in the disc, the index display appears.
SCENE TRANSITION
IN
WIPE IN
FADE OUT
OUT
PREVIEW
CANCEL
EXEC

Advertisement

Table of Contents
loading

Table of Contents