Operation Lock Feature - JVC Connected Cam GY-HC900CHU Instructions Manual

Operation Lock Feature

You can use this feature to prevent erroneous
camera operation.
.
1 While in the Camera mode (when the
display screen appears), press and hold
the [CANCEL/RESET] button for 5 seconds
or longer.
The operation lock turns on, and an operation
0
lock icon (r) appears on the display
screen.
Press the [CANCEL/RESET] button again for
0
5 seconds or longer to turn off the operation
lock.
Memo :
The operation lock feature is only valid in the
0
Camera mode.
(A P20 [Operation Modes] )
The power turns off and the operation lock is
0
disengaged.
The following remote operations are possible
0
even when the operation lock feature is turned
on ("On").
Operation from the remote control unit that is
0
connected to the [REMOTE] terminal.
Remote operation of the camera through
0
access via a browser on devices such as a
smartphone, tablet terminal, or PC.
Operation lock does not apply to the following
buttons and switches.
[POWER ON/OFF] switch
0
[ND FILTER] switch
0
[MONI SELECT] switch
0
[CH SELECT] switch
0
[AUDIO INPUT CH1/2/3/4] recording level
0
adjustment knob
[AUDIO SELECT CH1/2/3/4]-[MANUAL/
0
AUTO] selection switch
[AUDIO SELECT CH1/2/3/4]-[FRONT/REAR/
0
WIRELESS] selection switch
[TC PRESET] button
0
[TC GEN] time code generator switch
0
[MONITOR] volume adjustment knob
0
[ALARM] volume adjustment knob
0
[REC] button
0
User button assigned with the [Rec] function
0
All switches on the lens
0
While the viewfinder is connected
0
[PEAKING][BRIGHT][CONTRAST]
0
[CHROMA] Knob
[MIRROR][TALLY] Switch
0
Operation Lock Feature
53