Loading A Setup File - JVC Connected Cam GY-HC900CHU Instructions Manual

6 Select [Store] and press the Set button (R).
.
7 Save the file.
A confirmation screen appears when you
0
choose to overwrite.
Select [Overwrite] on the confirmation
screen, and press the Set button (R). Saving
starts, and "Storing..." appears on the screen.
Overwrite Picture File?
:SUNSET
Overwrite
Cancel
Load Picture File
.
Saving starts, and "Storing..." appears on the
0
screen when the file is newly saved.
.
8 Saving is complete.
After saving of the file is complete, "Complete"
appears on the screen, and the menu screen
closes automatically.

Loading a Setup File

1 Display the [Setup File] menu.
Select [System] B [Setup File] and press the
Set button (R).
(A P148 [ Setup File ] )
2 Select [Load File] and press the Set button
5
(R).
3 Select [Picture File], [User File] or [All File],
and press the Set button (R).
6
The existing files are displayed.
4 Select the file to load using the cross-
shaped button (JK), and press the Set
button (R).
.
7
Memo :
When the write-protect switch of the inserted SD
0
card is set, a z mark appears beside the SD
card icon. Setup files can be loaded from an SD
card even if the write-protect switch is set.
Setup files that are completely incompatible will
0
not be displayed.
(A P176 [Configuring Setup Files] )
5 Select [Load] on the confirmation screen,
and press the Set button (R).
Loading starts, and "Loading..." appears on the
screen.
.
6 Reading is complete.
After reading of the file is complete, "Complete"
appears on the screen, and the menu screen
closes automatically.
Load Picture File
Load Picture File?
Load
Cancel
Configuring Setup Files
4
5
177