Audio Output During Recording; Time Code And User's Bit - JVC Connected Cam GY-HC900CHU Instructions Manual

Audio Output during
Recording
You can check the recorded audio from the
0
monitor speaker or the headphone connected to
the [PHONE] terminal.
Adjust the volume of the speaker or headphone
0
using the [MONITOR] volume adjustment knob.
.
Memo :
Warning tone is output when there is an
0
abnormality in the camera recorder or when the
battery is low.
(A P222 [Warning Tone] )
The volume of the warning tone can be adjusted
0
using the [ALARM] volume adjustment knob or
configured in [A/V Set] B [Audio Set] B [Min.
ALARM Level].
(A P137 [ Min. ALARM Level ] )

Time Code and User's Bit

Time code and user's bit data are recorded with the
video in this camera recorder.
The time code and user's bit are displayed on the
viewfinder and LCD monitor during playback or
recording. (Display screen)
Displaying Time Code and User's Bit
The time code and user's bit are displayed on the
viewfinder and LCD monitor during playback or
recording.
The display differs according to the menu settings.
1 Set [LCD/VF] B [Display On/Off] B [TC/UB]
to "On".
(A P130 [Display On/Off Item] )
When "TC" or "UB" is selected, time code or
user's bit data is displayed respectively on the
display screen.
AB C D EF 89
0 0
H
282min SDI IN
100min 1080 /30p
50min
COMPRESS
ITU709
1 /64
ND AE ± 0
1 / 60
F2.8
ISO
102400
.
2 Select the display using the [TC DISPLAY]
TC/UB display switch.
Select time code display ([TC]) or user's bit
display ([UB]).

Audio Output during Recording

0 0 0 0 0 0
M S F
00: 00: 00.00
5 . 6f t
12 :34 : 56
K
B 5600
73