Siemens SIMATIC S7-1500 Automation System System Manual page 52
Hide thumbs
Also See for SIMATIC S7-1500 Automation System:
- System manual (523 pages) ,
- Function manual (402 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
Installation
5.6 Installing I/O modules
Uninstalling I/O modules
The I/O module is wired.
Proceed as follows to dismantle an I/O module:
1. Turn off all fed supply voltages.
2. Open the front cover.
3. For communication modules: Loosen and remove the connector from the module.
4. Loosen the fixing screw of the I/O module.
5. Pivot the I/O module out of the mounting rail.
52
At I/O modules: Pull the front connector out of the I/O module using the unlocking strap.
S7-1500 Automation System
System Manual, 01/2013, A5E03461182-01
Advertisement
Table of Contents
