Siemens S7-1500 Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Control Unit
  5. Simatic S7-1500
  6. Manual

Siemens S7-1500 Manual

Simatic top connect
Hide thumbs Also See for S7-1500:
Table of Contents

Advertisement

Quick Links

SIMATIC TOP connect for S7-1500 and
ET200MP
SIMATIC TOP connect for S7-1500
and ET200MP
Manual
___________________
Preface
___________________
Safety notes
___________________
Documentation guide
___________________
Product overview
___________________
Connecting
___________________
Wiring SIMATIC TOP
connect to the I/O modules
___________________
Technical specifications
___________________
Environment
___________________
Dimension drawings
___________________
Circuit diagrams
___________________
Spare parts / Accessories
___________________
Service and Support
1
2
3
4
5
6
7
A
B
C
D

Advertisement

Table of Contents
loading

Related Manuals for Siemens S7-1500

Summary of Contents for Siemens S7-1500

  • Page 1 ___________________ SIMATIC TOP connect for S7-1500 and Preface ET200MP ___________________ Safety notes ___________________ Documentation guide ___________________ Product overview ___________________ SIMATIC TOP connect for S7-1500 Connecting and ET200MP ___________________ Wiring SIMATIC TOP connect to the I/O modules Manual ___________________ Technical specifications...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Preface

    Preface Purpose of this documentation This documentation provides important information on wiring the I/O modules (input and output modules) of the S7-1500 SIMATIC controller and the ET 200MP modular I/O system with SIMATIC TOP connect system cabling. Basic knowledge required General knowledge about automation is needed to understand this documentation.

  • Page 5: Table Of Contents

    Mechanical and climatic ambient conditions................52 Technical specifications for front connector modules .............. 54 Technical specifications for connecting cables ................ 56 Technical specifications for terminal modules ................. 57 Environment ..........................69 Dimension drawings ........................71 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 6 Circuit diagrams, terminal modules for 16-pin connecting cable ..........94 Circuit diagrams, terminal modules for 50-pin connecting cable ..........105 Spare parts / Accessories ......................111 Accessories ..........................111 Service and Support ........................113 Index ............................115 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 7: Safety Notes

    Before installation or maintenance work can begin, the system's main switch must be switched off and measures taken to prevent it being switched on again. If this instruction is not followed, touching live parts can result in death or serious injury. SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 9: Documentation Guide

    The documentation for the SIMATIC products is modular in structure and covers a wide range of subjects relating to your automation system. The complete documentation for SIMATIC products in the S7-1500 product family with ET 200MP comprises the system manual, the function manuals and the product manuals.
  • Page 10 Documentation guide Overview of documentation for SIMATIC S71500 / ET200MP The tables below set out the documentation for SIMATIC S7-1500 / ET 200MP with the relevant content for system cabling. Table 2- 1 Documentation for SIMATIC S7-1500 / ET 200MP system cabling...

  • Page 11: Product Overview

    Introduction SIMATIC TOP connect system cabling is an efficient way to connect the I/O modules (input and output modules) of the SIMATIC controller S7-1500 I/O and ET 200MP. SIMATIC TOP connect uses standardized connectors and reduces the wiring work required.
  • Page 12 Fully modular connection The fully modular connection for the system cabling comprises the following components: ① ● A front connector module for connection to the SIMATIC S7-1500 or ET200MP I/O modules ② ● Connecting cables , pre-assembled or by the meter ③...
  • Page 13 Flexible connection ① The flexible connection for the system cabling comprises a front connector module connection to the SIMATIC S7-1500 or ET200MP digital I/O modules. The front connector is ② already wired with 20 or 40 single wires which connect the SIMATIC S7-1500 or ET200MP digital I/O modules directly to the sensors and actuators in the control cabinet.

  • Page 14: Components

    For DI/DO digital modules (power • supply with push-in or screw-type terminals) For 2A digital output 1 x 8 DO • (power supply with push-in or screw- type terminals) For analog modules • SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 15 The terminal modules are available in the following connecting systems: Push-in system • Screw-type terminals • All digital terminal modules also have LED for channel display. SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 16 Accessories for fully modular connection of SIMATIC TOP connect Accessories Function Labels Labels (20 x 7 mm, pale turquoise) in the S7-1500 design are available for labeling the terminal modules. Shield plate The shield plate can be fitted onto the terminal module for analog signals. The terminal module with the fitted shield plate is fastened to the standard mounting rail.

  • Page 17: Connectable I/O Modules

    Product overview 3.3 Connectable I/O modules Connectable I/O modules The tables below list all input and output modules of the SIMATIC controller S7-1500 and ET 200MP that can be connected with the SIMATIC TOP connect fully modular connection. Table 3- 4...

  • Page 19: Connecting

    This section provides an overview of the most important rules for connecting SIMATIC TOP connect. Rules and regulations governing the integration of the S7-1500 into a plant or system can also be found under "Rules and regulations" in the S7-1500 system manual (http://support.automation.siemens.com/WW/view/en/59191792).
  • Page 20 The following section details the points to note to prevent electrical interference and faults: ● You must make sure that each plant or system fitted with an S7-1500 is connected to a protective conductor with a sufficient cross-section to deal with electromagnetic interference.

  • Page 21: Wiring Rules

    SD 0.6 x 3.5 DIN 5264 SD 0.6 x 3.5 DIN 5264 screwdriver Tightening torque for 0.4 Nm 0.4 Nm connecting the cables See also Connecting the connecting cable and supply voltage to the front connector module (Page 27) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 22: Connecting Components

    The connection of standard front connectors is described in detail in the S7-1500 system manual under "Connecting" (http://support.automation.siemens.com/WW/view/en/59191792). Before connecting the front connector modules, read the following sections of the S7-1500 system manual: ● Wiring front connectors for I/O modules without shield connection element ●...
  • Page 23 Assembling the round-sheath ribbon cable (Page 24) Wiring the front connector module (Page 26) Connecting the connecting cable and supply voltage to the front connector module (Page 27) Connecting the connecting cable to the terminal module (Page 31) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 24: Assembling The Round-Sheath Ribbon Cable

    Top connector, front Approx. 130 mm Approx. 130 mm connector module Bottom connector, Approx. 80 mm Approx. 80 mm front connector module Terminal module Approx. 40 mm 100 mm 100 mm connector SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 25 5. Run the round-sheath ribbon cable back over the top of the connector. Figure 4-2 Running round-sheath ribbon cable back over top of connector 6. Lay the round-sheath ribbon cable up against the connector. SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 26: Wiring The Front Connector Module

    The front connector module is used to connect the connecting cable to the I/O module. The supply voltage cables for the modules can also be connected to the front connector module. See also Wiring SIMATIC TOP connect to the I/O modules (Page 33) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 27: Connecting The Connecting Cable And Supply Voltage To The Front Connector Module

    1. Switch off the load current supply. 2. Lift up the front flap of the I/O module until it snaps into place. Figure 4-4 Front flap of the I/O module open (example) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 28 4. If required, connect the cables for the I/O module supply voltage to the front connector module. 5. Connect the connecting cables to the front connector module. Figure 4-6 Connecting the supply voltage cables and connecting cables to the front connector module (example) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 29 ① Supply voltage + ② Supply voltage + ③ Supply voltage - ④ Supply voltage - ⑤ Supply voltage + ⑥ Supply voltage + ⑦ Supply voltage - ⑧ Supply voltage - SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 30 Figure 4-7 Fitted strain relief (example) 9. Run the connecting cables and the cables for the I/O module supply voltage down and out of the I/O module. See also Wiring rules (Page 21) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 31: Connecting The Connecting Cable To The Terminal Module

    Terminal module function The terminal module is the interface between the connection cables from the field and the SIMATIC S7-1500 or ET200MP. The supply voltage cables for the I/O modules can also be connected to the terminal module. Fitting the terminal module and connecting cable 1.

  • Page 32: Connecting The Actuators/Sensors To The Terminal Module

    The terminal modules are identified using labels. The labels are perforated and are attached to the front flap of the terminal module. The following types of labels are available: ● For terminal modules in S7-1500 design Preparing and attaching labels 1. Tear out the completed label.

  • Page 33: Wiring Simatic Top Connect To The I/O Modules

    …digital, for 3-wire connection, with LED - Screw-type terminals 6ES7924-0CA20-0BA0 - Push-in system 6ES7924-0CA20-0BC0 …for 3-wire connection, with LED, digital - Screw-type terminals 6ES7924-0CL20-0BA0 and fuse in the signal path - Push-in terminals 6ES7924-0CL20-0BC0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 34 16-pin IDC connectors for the round-sheath ribbon cable (x 8) 6ES7921-3BE10-0AA0 Crimping pliers for fitting the 16-pin IDC connectors 6ES7928-0AA00-0AA0 20 x 7 mm label, pale turquoise, for fitting to terminal modules 3RT1900-1SB20 (x 340) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 35 I/O modules of the automation system. TPA TPRi TPRi TPRo TPOo 230 V 110 V With With Withou With With With With With With With t LED fuse switch SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 36 Wiring SIMATIC TOP connect to the I/O modules 5.1 SIMATIC TOP connect components and selection guide TPA TPRi TPRi TPRo TPOo 230 V 110 V With With Withou With With With With With With With t LED fuse switch SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 37 5.0 m 6ES7923-5BF00-0CB0 6ES7923-5BF00-0DB0 6.5 m 6ES7923-5BG50-0CB0 6ES7923-5BG50-0DB0 8.0 m 6ES7923-5BJ00-0CB0 6ES7923-5BJ00-0DB0 10.0 m 6ES7923-5CB00-0CB0 6ES7923-5CB00-0DB0 Accessories 20 x 7 mm label, pale turquoise, for 3RT1900-1SB20 fitting to terminal modules (x 340) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 38 6ES7532-5HF00-0AB0 1-wire or 3-wire connection With a 1-wire or 3-wire connection, you can connect the supply voltage for the I/O modules either at the front connector module or at the terminal module. SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 39: Note On Connecting Digital I/O Modules

    Make sure when you wire the potential bridges that no continuous current of over 8 A per potential bridge can occur. Note The potential bridges are usually inserted in the front connector module. SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 40 M potential (all bridged internally) • Bottom row, terminals for: ③ L+ potential (all bridged internally) • See also Note on connecting the 2 A output module (Page 41) Documentation guide (Page 9) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 41: Note On Connecting The 2 A Output Module

    The potential of M1 and M2 can be bridged. ① 2-ampere front connector module ② Standard connecting cable between front connector module and terminal module ③ Additional connecting cable for M1 and M2 ④ 2 A output module SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 42 Bottom row Bottom row ④ ③ M1 potential (all "M1" terminal M2 potential (all "M2" terminal points bridged internally) points bridged internally) See also Wiring rules (Page 21) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 43: Note On Connecting Analog I/O Modules

    I/O module. Two terminal modules can be connected to each side of the I/O module. The alphabetically labeled clamping points of the analog terminal module are connected to the numbered clamping points of the I/O module as shown in the table below. SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 44 Clamping points L+; M; +; -; of the analog terminal module are auxiliary terminals and are not connected to the I/O module. There is an electrical connection between all clamping points with the same designation (labeling) on the analog terminal module (multiplication terminal). SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 45: Shield Connection Of The Signal Cables

    There are two options for grounding the signal cable shield: ● At the I/O module with the shield connection element of the front connector/front connector module; see S7-1500 function manual, Connections, Front connectors (http://support.automation.siemens.com/WW/view/en/59191792) for the I/O modules. ● At the terminal module directly with a shield plate; see the description below.
  • Page 46 4. Mount the terminal module with attached shield plate on the standard mounting rail. The shield plate connects the terminal module to the grounded mounting rail. 5. Position the shield of the signal cables with the shield connection terminals on the shield plate. SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 47 2. Push the shield clamp over the connecting cable shield. 3. Connect the connecting cable to the front connector module. 4. Push the shield clamp up over the shield clip to connect the cable shield SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 49: Technical Specifications

    The valid marks and approvals are printed on the components of the SIMATIC TOP connect system cabling. Reference The corresponding certificates for the marks and approvals can be found on the Internet under Service & Support (http://www.siemens.com/automation/service&support). SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 50 IEC 61131-2 standard (Programmable Logic Controllers, Part 2: Equipment Requirements and Tests). Industrial applications SIMATIC products are designed for industrial applications. Field of application Noise emission requirements Noise immunity requirements Industry EN 61000-6-4: 2007 EN 61000-6-2: 2005 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 51: Electromagnetic Compatibility

    6.2 Electromagnetic compatibility Use in residential areas Note SIMATIC TOP connect system cabling and the S7-1500 automation system are designed for use in industrial areas; their use in residential areas could interfere with radio and TV reception. To operate SIMATIC TOP connect system cabling and S7-1500 automation systems in a residential area, the RF emission must comply with Limit Value Class B to EN 55011.

  • Page 52: Shipping And Storage Conditions

    SIMATIC TOP connect system cabling is designed for stationary use in weather-proof locations. The conditions of use meet the requirements of DIN IEC 60721-3-3: ● Class 3M3 (mechanical requirements) ● Class 3K3 (climatic requirements) SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 53 SIMATIC TOP connect cabling system to shock-absorbent material (for example, metal shock absorbers). Ambient climatic conditions SIMATIC TOP connect system cabling components may only be used in the ambient climatic conditions specified in the technical specifications. Please see the following sections. SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 54: Technical Specifications For Front Connector Modules

    Max. permissible total current per group At 40 °C (mounted horizontally) At 60 °C (mounted horizontally) At 25 °C (mounted vertically) At 40 °C (mounted vertically) 2.5 A Permissible ambient temperature 0 to 60 °C SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 55 Lower limit of admissible range (DC) 20.4 V Upper limit of admissible range (DC) 28.8 V Max. permissible continuous current Per connector pin 0.5 A Permissible ambient temperature 0 to 60 °C SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 56: Technical Specifications For Connecting Cables

    External diameter of round-sheath ribbon cable to be assembled 1 x 16-pin, unshielded Approx. 9.5 mm 1 x 16-pin, shielded Approx. 10.5 mm 2 x 16-pin, unshielded Approx. 11.5 mm Permissible ambient temperature 0 to 60 °C SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 57: Technical Specifications For Terminal Modules

    Overvoltage category II, pollution degree 2 Dimensions (W x H x D) in mm 1-wire connection Approx. 40 x 58 x 50 6ES7924-0AA20-0Ax0 For 3-wire initiators Approx. 57 x 76 x 60 6ES7924-0CA20-0Ax0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 58 For 3-wire initiators 6ES7924-0CA20-0Bx0 Approx. 57 x 76 x 60 Table 6- 9 Technical specifications for terminal module TPA Terminal modules TPA, 16-pin, for analog modules in S7-1500 or ET200MP 6ES7924-0CC20-0Ax0 series Type of supply voltage Operating voltage max. 50 V Max.
  • Page 59 CSA C22.2 No 142 UL 508, VDE 0160,0 overvoltage category II, pollution degree 2 Dimensions (W x H x D) in mm For 3-wire initiators with fuse 6ES7924-0CL20- Approx. 57 x 76 x 60 0Bx0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 60 CSA C22.2 No 142 UL 508, VDE 0160, Overvoltage category II, pollution degree 2 Dimensions (W x H x D) in mm For 2 A modules 6ES7924-0BB20-0Ax0 Approx. 57 x 76 x 60 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 61 IEC 60664-1, IEC61131-2, CSA C22.2 No 142 UL 508, VDE 0160, overvoltage category II, pollution degree 2 Dimensions (W x H x D) in mm 6ES7924-0BE20-0Bx0 Approx. 130 x 76 x 60 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 62 IEC 60664-1, IEC61131-2, CSA C22.2 No 142 UL 508, VDE 0160, overvoltage category II, pollution degree 2 Dimensions (W x H x D) in mm 6ES7924-0BG20-0Bx0 Approx. 130 x 76 x 60 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 63 IEC 60664-1, IEC61131-2, CSA C22.2 No 142 UL 508, VDE 0160, overvoltage category II, pollution degree 2 Dimensions (W x H x D) in mm 6ES7924-0BG20-0Bx0 Approx. 100 x 76 x 60 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 64 When output "off" and R > 2 MOhm load Recommended conductor cross-section for cable 1.5 mm Group fault messages SF1, SF2 Monitored channels SF1: Channels 0 … 3, SF2: Channels 4 … 7 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 65 IEC 60664-1, IEC61131-2, CSA C22.2 No 142 UL 508, VDE 0160, overvoltage category II, pollution degree 2 Dimensions (W x H x D) in mm 6ES7924-0BF20-0Bx0 Approx. 130 x 76 x 60 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 66 II, pollution degree 2 Dimensions (W x H x D) in mm 1-wire connection 6ES7924-2AA20-0Bx0 Approx. 100 x 76 x 60 For 3-wire initiators 6ES7924-2CA20-0Bx0 Approx. 175 x 76 x 60 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 67 Technical specifications 6.7 Technical specifications for terminal modules Table 6- 19 Technical specifications for terminal module TPA Terminal modules TPA, 50-pin, for analog modules in S7-1500 or ET200MP 6ES7924-2CC20-0Ax0 series Type of supply voltage Operating voltage max. 50 V Max. permissible continuous current per signal...

  • Page 69: Environment

    The device conforms to the RoHS Directive. No materials used release silicone. Disposal provisions The packaging and packing products are recyclable and should be recycled. The product itself must not be disposed of in the household waste. SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 71: Dimension Drawings

    Dimension drawings Front connector modules Views All views in the dimension drawings below are numbered. The following applies: Number View ① Front view ② View from left Note All dimensions in millimeters (mm). SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 72 Dimension drawings A.1 Front connector modules Front connector module 6ES7921-5AB20-0AA0 8-bit, for digital modules Figure A-1 6ES79215AB20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 73 Dimension drawings A.1 Front connector modules Front connector module 6ES7921-5AH20-0AA0 8-bit, for digital modules Figure A-2 6ES7921-5AH20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 74 Dimension drawings A.1 Front connector modules Front connector module 6ES7921-5AK20-0AA0 8-bit, for analog modules Figure A-3 6ES7921-5AK20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 75 Dimension drawings A.1 Front connector modules Front connector module 6ES7921-5AD00-0AA0 8-bit, for 2 A modules Figure A-4 6ES7921-5AD00-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 76 Dimension drawings A.1 Front connector modules Front connector module 6ES7921-5AJ00-0AA0 8-bit, for 2 A modules Figure A-5 6ES7921-5AJ00-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 77 Dimension drawings A.1 Front connector modules Front connector module 6ES7921-5CB20-0AA0 32-bit, for digital modules Figure A-6 6ES7921-5CB20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 78 Dimension drawings A.1 Front connector modules Front connector module 6ES7921-5CH20-0AA0 32-bit, for digital modules Figure A-7 6ES7921-5CH20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 79 Dimension drawings A.1 Front connector modules Front connector module 6ES7921-5CK20-0AA0 32-bit, for analog modules Figure A-8 6ES7921-5CK20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 80: Terminal Modules For 16-Pin Connecting Cable

    ③ Left view with front flap closed Note All dimensions in millimeters (mm). Note The dimensions for terminal modules with screw-type terminals are the same as for those with the push-in system. SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 81 Dimension drawings A.2 Terminal modules for 16-pin connecting cable Terminal module 6ES7924-0AA20-0AA0 TP1 without LED Figure A-9 6ES7924-0AA20-0AA0 Terminal module 6ES7924-0AA20-0BA0 TP1 with LED Figure A-10 6ES7924-0AA20-0BA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 82 Dimension drawings A.2 Terminal modules for 16-pin connecting cable Terminal module 6ES7924-0BB20-0AA0 TP2 without LED Figure A-11 6ES7924-0BB20-0AA0 Terminal module 6ES7924-0CA20-0AA0 TP3 without LED Figure A-12 6ES7924-0CA20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 83 Dimension drawings A.2 Terminal modules for 16-pin connecting cable Terminal module 6ES7924-0CA20-0BA0 TP3 with LED Figure A-13 6ES7924-0CA20-0BA0 Terminal module 6ES7924-0CC20-0AA0 TPA without LED Figure A-14 6ES7924-0CC20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 84 Dimension drawings A.2 Terminal modules for 16-pin connecting cable Terminal module 6ES7924-0BE20-0BA0 TPRi 230 V with LED Figure A-15 6ES7924-0BE20-0BA0 Terminal module 6ES7924-0BG20-0BA0 TPRi 110 V with LED Figure A-16 6ES7924-0BG20-0BA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 85 Dimension drawings A.2 Terminal modules for 16-pin connecting cable Terminal module 6ES7924-0BD20-0BA0 TPRo with LED Figure A-17 6ES7924-0BD20-0BA0 Terminal module 6ES7924-0BF20-0BA0 TPOo with LED Figure A-18 6ES7924-0BF20-0BA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 86: Terminal Modules For 50-Pin Connecting Cable

    All dimensions in millimeters (mm). Note The dimensions for terminal modules with screw-type terminals are the same as for those with the push-in system. Terminal module 6ES7924-2AA20-0AA0 TP1 without LED Figure A-19 6ES7924-2AA20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 87 Dimension drawings A.3 Terminal modules for 50-pin connecting cable Terminal module 6ES7924-2AA20-0BA0 TP1 with LED Figure A-20 6ES7924-2AA20-0BA0 Terminal module 6ES7924-2CA20-0AA0 TP3 without LED Figure A-21 6ES7924-2CA20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 88 Dimension drawings A.3 Terminal modules for 50-pin connecting cable Terminal module 6ES7924-2CA20-0BA0 TP3 with LED Figure A-22 6ES7924-2CA20-0BA0 Terminal module 6ES7924-2CC20-0AA0 TPA without LED Figure A-23 6ES7924-2CC20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 89: Circuit Diagrams

    Circuit diagrams for front connector modules Front connector modules 6ES7921-5AB20-0AA0 and 6ES7921-5AH20-0AA0 For digital I/O modules Front connector module with potential supply Connecting terminals in Screw-type system: 6ES7921-5AB20-0AA0 Push-in system: 6ES7921-5AH20-0AA0 Figure B-1 6ES7921-5AB20-0AA0 and 6ES7921-5AH20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 90 B.1 Circuit diagrams for front connector modules Front connector module 6ES7921-5AD00-0AA0 and 6ES7921-5AJ00-0AA0 For 2-ampere digital output modules Front connector module with potential supply Connecting terminals in Screw-type system: 6ES7921-5AD00-0AA0 Push-in system: 6ES7921-5AJ00-0AA0 Figure B-2 6ES7921-5AD00-0AA0 and 6ES7921-5AJ00-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 91 Circuit diagrams B.1 Circuit diagrams for front connector modules Front connector module 6ES7921-5AK20-0AA0 For analog I/O modules Front connector module for connecting 4 x 16-pin connecting cables Article number 6ES7921-5AK20-0AA0 Figure B-3 6ES7921-5AK20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 92 B.1 Circuit diagrams for front connector modules Front connector modules 6ES7921-5CB20-0AA0 and 6ES7921-5CH20-0AA0 For digital I/O modules Front connector module with potential supply Connecting terminals in Screw-type system: 6ES7921-5CB20-0AA0 Push-in system: 6ES7921-5CH20-0AA0 Figure B-4 6ES7921-5CB20-0AA0 and 6ES7921-5CH20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 93 Circuit diagrams B.1 Circuit diagrams for front connector modules Front connector module 6ES7921-5CK20-0AA0 For analog I/O modules Front connector module for connecting 50-pin connecting cable Article number 6ES7921-5CK20-0AA0 Figure B-5 6ES7921-5CK20-0AA0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 94: Circuit Diagrams, Terminal Modules For 16-Pin Connecting Cable

    B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0AA20-0Ax0 Terminal module TP1 For S7-300 / ET200M / S7-1500 / ET200MP, for 8 I/O (16-pin connecting cables) Connecting terminals in Screw-type system: 6ES7924-0AA20-0AA0 Push-in system: 6ES7924-0AA20-0AC0...
  • Page 95 B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0AA20-0Bx0 Terminal module Tp1 with LED For S7-300 / ET200M / S7-1500 / ET200MP, for 8 I/O (16-pin connecting cables) Connecting terminals in Screw-type system: 6ES7924-0AA20-0BA0 Push-in system: 6ES7924-0AA20-0BC0...
  • Page 96 Circuit diagrams B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0BD20-0Ax0 Terminal module TPRo For S7-300 / ET200M / S7-1500 / ET200MP Connecting terminals in Screw-type system: 6ES7924-0BD20-0AA0 Push-in system: 6ES7924-0BD20-0AC0 Figure B-9 6ES7924-0BD20-0Ax0 SIMATIC TOP connect for S7-1500 and ET200MP...
  • Page 97 Circuit diagrams B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0BE20-0Ax0 Terminal module TPRi 230 V For S7-300 / ET200M / S7-1500 / ET200MP Connecting terminals in Screw-type system: 6ES7924-0BE20-0AA0 Push-in system: 6ES7924-0BE20-0AC0 Figure B-10 6ES7924-0BE20-0Ax0 SIMATIC TOP connect for S7-1500 and ET200MP...
  • Page 98 Circuit diagrams B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0BF20-0Ax0 Terminal module TPOo For S7-300 / ET200M / S7-1500 / ET200MP Connecting terminals in Screw-type system: 6ES7924-0BF20-0AA0 Push-in system: 6ES7924-0BF20-0AC0 Figure B-11 6ES7924-0BF20-0Ax0 SIMATIC TOP connect for S7-1500 and ET200MP...
  • Page 99 Circuit diagrams B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0BG20-0Ax0 Terminal module TPRi 110 V For S7-300 / ET200M / S7-1500 / ET200MP Connecting terminals in Screw-type system: 6ES7924-0BG20-0AA0 Push-in system:6ES7924-0BG20-0AC0 Figure B-12 6ES7924-0BG20-0Ax0 SIMATIC TOP connect for S7-1500 and ET200MP...
  • Page 100 B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0CA20-0Ax0 Terminal module TP3 without LED For S7-300 / ET200M / S7-1500 / ET200MP, for 8 I/O (16-pin connecting cables) Connecting terminals in Screw-type system: 6ES7924-0CA20-0AA0 Push-in system: 6ES7924-0CA20-0AC0...
  • Page 101 Circuit diagrams B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0CA20-0Bx0 Terminal module TP3 with LED For S7-300 / ET200M / S7-1500 / ET200MP, for 8 I/O (16-pin connecting cables) Connecting terminals in Screw-type system:6ES7924-0CA20-0BA0 Push-in system: 6ES7924-0CA20-0BC0...
  • Page 102 B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0CC20-0Ax0 Terminal module TPA (S7-1500) For S7-1500 / ET200MP Connecting terminals in Screw-type system: 6ES7924-0CC20-0AA0 Push-in system: 6ES7924-0CC20-0AC0 Figure B-15 6ES7924-0CC20-0Ax0 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 103 B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0CH20-0Bx0 Terminal module TPS, with LED switch For S7-300 / ET200M / S7-1500 / ET200MP, for 8 I/O (16-pin connecting cables) Connecting terminals in Screw-type system: 6ES7924-0CH20-0BA0 Push-in system: 6ES7924-0CH20-0BC0...
  • Page 104 B.2 Circuit diagrams, terminal modules for 16-pin connecting cable Terminal module 6ES7924-0CL20-0Bx0 Terminal module TPF with LED fuse For S7-300 / ET200M / S7-1500 / ET200MP, for 8 I/O (16-pin connecting cables) Connecting terminals in Screw-type system: 6ES7924-0CL20-0BA0 Push-in system: 6ES7924-0CL20-0BC0...

  • Page 105: Circuit Diagrams, Terminal Modules For 50-Pin Connecting Cable

    B.3 Circuit diagrams, terminal modules for 50-pin connecting cable Circuit diagrams, terminal modules for 50-pin connecting cable Note All terminal modules for 50-pin connecting cables are for use with S7-1500 and ET200MP only. Terminal module 6ES7924-2AA20-0Ax0 Terminal module TP1 without LED...
  • Page 106 Circuit diagrams B.3 Circuit diagrams, terminal modules for 50-pin connecting cable Terminal module 6ES7924-2AA20-0Bx0 Terminal module TP1 with LED For S7-1500 / ET200MP 32 I/O (50-pin connecting cables) Connecting terminals in Screw-type system: 6ES7924-2AA20-0BA0 Push-in system: 6ES7924-2AA20-0BC0 Figure B-19 6ES7924-2AA20-0Bx0...
  • Page 107 Circuit diagrams B.3 Circuit diagrams, terminal modules for 50-pin connecting cable Terminal module 6ES7924-2CA20-0Ax0 Terminal module TP3 For S7-1500 / ET200MP 32 I/O (50-pin connecting cables) Connecting terminals in Screw-type system: 6ES7924-2CA20-0AA0 Push-in system: 6ES7924-2CA20-0AC0 Figure B-20 6ES7924-2CA20-0Ax0 SIMATIC TOP connect for S7-1500 and ET200MP...
  • Page 108 Circuit diagrams B.3 Circuit diagrams, terminal modules for 50-pin connecting cable Terminal module 6ES7924-2CA20-0Bx0 Terminal module TP3 with LED For S7-1500 / ET200MP 32 I/O (50-pin connecting cables) Connecting terminals in Screw-type system: 6ES7924-2CA20-0BA0 Push-in system: 6ES7924-2CA20-0BC0 Figure B-21 6ES7924-2CA20-0Bx0...
  • Page 109 Circuit diagrams B.3 Circuit diagrams, terminal modules for 50-pin connecting cable Terminal module 6ES7924-2CC20-0Ax0 Terminal module TPA for S7-1500 / ET200MP analog modules Connecting terminals in Screw-type system: 6ES7924-2CC20-0AA0 Push-in system: 6ES7924-2CC20-0AC0 Figure B-22 6ES7924-2CC20-0Ax0 SIMATIC TOP connect for S7-1500 and ET200MP...

  • Page 111: Spare Parts / Accessories

    Accessories Accessories for SIMATIC TOP connect system cabling Designation Order number Labels for fitting to terminal modules in the S7-1500 design, pack of 340, plug-in 3RT1900-1SB20 IDC connector (insulation displacement connector), set of 8 with 8 strain reliefs 6ES7921-3BE10-0AA0 Pliers for IDC connectors (insulation displacement connectors) for assembling the round-sheath...

  • Page 113: Service And Support

    At your service locally, around the globe: for consulting, sales, training, service, support, spare parts ... for every product supplied by Industry Automation and Drive Technologies. To find your contact person, please go to our Contacts Database on the Internet (http://www.siemens.com/automation/partner). SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

  • Page 115: Index

    EMC Directive, 50 Shield plate, 45 Shield plate, 45 Standards, 49 Flexible connection, 13 Fully modular connection, 12 Functions of the front connector module, 26 Terminal module function, 31 Test values, 49 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...
  • Page 116 Index Use in residential areas, 51 Wiring rules Front connector modules, 21 Terminal modules, 21 Wiring sequence, 23 SIMATIC TOP connect for S7-1500 and ET200MP Manual,...

This manual is also suitable for:

Et200mp

Table of Contents