Dimension Drawing Of I/O Module With Shield Contact Element - Siemens SIMATIC S7-1500 Automation System System Manual

Note
Minimum clearances
Observe the minimum clearances of 25 mm, above and below the mounting rail, as
described in the chapterMounting (Page 39).
A.5

Dimension drawing of I/O module with shield contact element

Dimension drawing of I/O module with shield contact element
The following figures show an I/O module with shield contact element, in front and side view.
Figure A-12
S7-1500 Automation System
System Manual, 01/2013, A5E03461182-01
A.5 Dimension drawing of I/O module with shield contact element
Dimension drawing of I/O module with shield connection element, front and side views
Dimension drawings
181