Dimension drawings
A.7 Dimension drawing of system power supply, 70 mm wide
Note
Minimum clearances
Observe the minimum clearances of 25 mm, above and below the mounting rail, as
described in the chapterMounting (Page 39).
A.7
Dimension drawing of system power supply, 70 mm wide
In this appendix you will find the dimension drawing of the system power supply installed on
a mounting rail, as well as a dimension drawing with open front cover. Always observe the
specified dimensions for installation in cabinets, control rooms, etc.
Figure A-16
184
Dimension drawing of system power supply (70 mm wide), front and side views
S7-1500 Automation System
System Manual, 01/2013, A5E03461182-01