WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
optical
drive.
2
Remove the
base
cover.
Procedure
1
Lift the latch and disconnect the optical-drive connector-board cable from the system board (Optional).
2
Lift the latch and disconnect the optical-drive connector-board cable from the optical-drive board connector (Optional).
3
Lift the optical-drive connector-board cable off the system board (Optional).
4
Open the latch and disconnect the display cable from the system board.
5
Remove the display cable from the routing guides on the fan.
6
Disconnect the fan cable from the system board.
7
Remove the three screws (M2.5x5) that secure the fan to the palm rest and keyboard board assembly.
8
Lift the fan off the palm rest and keyboard board assembly.
38
Removing the fan
computer. After working inside your computer, follow the instructions in
Removing the fan
After working inside
www.dell.com/
20