NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then
place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when
the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a
component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Base cover
Palm rest and keyboard
assembly
Base cover
Palm rest and keyboard
assembly
Base cover
Palm rest and keyboard
assembly
Battery
Palm rest and keyboard
assembly
Display panel
Display back-cover and
antenna assembly
Fan
Palm rest and keyboard
assembly
Hard-drive assembly
Palm rest and keyboard
assembly
Hard-drive bracket
Hard drive
Heat sink
System board
Hinges
Palm rest and keyboard
assembly
Hinge brackets
Display back-cover and
antenna assembly
Screw type
Quantity
M2x2
2
M2x4
1
M2.5x7
6
M2x3
4
M2x2
4
M2.5x5
3
M2x3
4
M3x3
4
M2x3
3
M2.5x5
5
(M2.5x4)
8
5
Screw list
Screw image
NOTE:
Screw color
may vary depending
on the configuration
ordered.
Screw list
15