Enabling Intel Optane Memory; Disabling Intel Optane Memory; Wifi Power Cycle - Dell Inspiron 3580 Service Manual
Hide thumbs
Also See for Inspiron 3580:
- Owner's manual (154 pages) ,
- Technical manualbook (47 pages) ,
- Setup and specifcations (23 pages)
Table of Contents
Advertisement
Diagnostic light codes
3,2
3,3
3,4
3,5
3,6
3,7
Camera status light: Indicates whether the camera is in use.
•
Solid white — Camera is in use.
•
Off — Camera is not in use.
Caps Lock status light: Indicates whether Caps Lock is enabled or disabled.
•
Solid white — Caps Lock enabled.
•
Off — Caps Lock disabled.
Enabling Intel Optane memory
1
On the taskbar, click the search box, and then type Intel Rapid Storage Technology.
2
Click Intel Rapid Storage Technology.
The Intel Rapid Storage Technology window is displayed.
3
On the Status tab, click Enable to enable the Intel Optane memory.
4
On the warning screen, select a compatible fast drive, and then click Yes to continue enabling Intel Optane memory.
5
Click Intel Optane memory > Reboot to complete enabling your Intel Optane memory.
NOTE:
Applications may take up to three subsequent launches after enablement to see the full performance benefits.
Disabling Intel Optane memory
CAUTION:
After disabling Intel Optane memory, do not uninstall the driver for Intel Rapid Storage Technology as it will result in a
blue screen error. The Intel Rapid Storage Technology user interface can be removed without uninstalling the driver.
NOTE:
Disabling Intel Optane memory is required before removing the SATA storage device accelerated by the Intel Optane
memory module from the computer.
1
On the taskbar, click the search box, and then type Intel Rapid Storage Technology.
2
Click Intel Rapid Storage Technology.
The Intel Rapid Storage Technology window is displayed.
3
On the Intel Optane memory tab, click Disable to disable the Intel Optane memory.
NOTE:
For computers in which Intel Optane memory acts as a primary storage, do not disable the Intel Optane memory. The
Disable option will be grayed out.
4
Click Yes if you accept the warning.
The disabling progress is displayed.
5
Click Reboot to complete disabling your Intel Optane memory and restart your computer.
WiFi power cycle
If your computer is unable to access the internet due to WiFi connectivity issues a WiFi power cycle procedure may be performed. The
following procedure provides the instructions on how to conduct a WiFi power cycle:
Problem description
PCI, video card/chip failure
Recovery image not found
Recovery image found but invalid
Power-rail failure
System BIOS Flash incomplete
Management Engine (ME) error
Troubleshooting
107
Hide quick links:
Advertisement
Table of Contents
