Table of Contents
Advertisement
INSTALLATION
6) Place the Left Top Log D)02-46 on the pin
on Log B)02-56 and on top of the cutout
on Log A)02-65.
D)02-46
B)02-56
C)02-44
Pin
7) Place Front Right Log E)02-45 on the two
pins as shown.
E)02-45
8) Place the lava rock in the area between
the left and right logs, leaving a space in
the middle for log (F) 02-47.
Ensure that the lava rocks are not placed
directly over the burner ports.
10
9) Place the notch in Center Log F)02-47 over
Log E)02-45 and across the cutout on Log
A)02-65.
A)02-65
10) Position notch in Front Right Log G)02-48
Cutout
on Log F)02-47 and push the bottom right
edge against the bracket on the burner
tray.
A)02-65
Notch
A)02-65
F)02-47
E)02-45
Notch
Cutout
G)02-48
E)02-45
B)02-56
C)02-44
G)02-48
E)02-45
Side View
The bottom right edge of Log G)02-48 must
sit snugly against the bracket
11) Test fire to ensure proper light off (make
sure flame flows smoothly from one end
of burner to the other. If there is any flame
hesitation, check that area for any blockage
of the burner port.
A)02-65
E)02-45
Regency F38-2 Freestanding Gas Stove
Bracket
Advertisement
Table of Contents
