Part 3: Operations
4. PRINTER SERVICING FUNCTIONS
4.1 Service Mode
This mode is used for servicing the printer.
4.1.1 Service mode operation
a) How to enter Service mode
Follow the procedure below to enter Service mode.
1) Turn off the printer.
2) Turn on the printer while holding down the [Paper Source] button and [Online]
button.
3) Check that "Canon W6200PG" is shown on the display, and then release the
buttons.
4) Next, "SERVICE MODE" is shown on the display. (If sheets are inserted, this will
be displayed after the sheets are loaded.)
5) Use the [ ] button to make a selection.
Service mode is added to the options in the Main menu.
Service mode can be entered even during error status (when Exxxx and Wxxxx are
shown on the display) by turning the power off and then using the above key
operation.
b) How to exit Service mode
To exit Service mode, turn off the printer.
c) Buttons used in Service mode
• Selecting menus and parameters: [<] button or [>] button
• Entering a lower-level menu:
• Entering a higher-level menu:
• Setting menus and parameters:
[ ] button
[ ] button
[Enter] button
3-24
W6200