W6200
7.3.13
E02812/E02A00/E02A01/E02A02/E02A03
Engine controller internal error
<Cause>
This is displayed when an error occurs in the engine controller EEPROM.
This is displayed when an error occurs in the firmware of the engine controller.
This is displayed when an error occurs in the FLASH ROM of the engine controller.
<Probable problem locations>
Engine controller, system controller
<Remedy>
1.Turn the power off and then on again.
2.Replace the engine controller.
3.Replace the system controller.
7.3.14
E02815/E02816/E02817/E02818
Maintenance cartridge error
<Cause>
Fault in maintenance cartridge EEPROM.
Maintenance cartridge ID error.
Maintenance cartridge not installed.
Maintenance cartridge full.
<Probable problem locations>
Maintenance cartridge, engine controller and system controller
<Remedy>
1.Replace maintenance cartridge.
2.Replace engine controller.
3.Replace system controller.
5-55
Part 5: Maintenance