Interface Specifications; Network - Canon W6200 Service Manual

Part 2: Product Specifications

2.2 Interface Specifications

2.2.1 Network

1) Interface format
Interface complying with IEEE802.3 standards
2) Data transfer
10Base-T/100Base-TX
3) Signal level
Input : threshold
10 Base-T :
100 Base-TX :
Output:
10 Base-T :
100 Base-TX :
4) Interface cable
Category 5 (UTP or FTP) cable, 100 m max.
Compliance with ANSI/EIA/TIA-568A or ANSI/EIA/TIA-568B standards
5) Interface connector
Printer side: IEEE802.3 standards, compliance with ANSI X3.263 standards, and
ISO/IEC60603-7 standards
Cable side: Compliance with ANSI/EIA/TIA-568A or ANSI/EIA/TIA-568B standards,
RJ-45 type
6) Input/output signals and pin configuration
For details, see
max +585mV
min +300mV
turn-on +1000mV diff pk-pk
turn-off +200mV diff pk-pk
+2.2V ~ +2.8V
+0.95V ~ +1.05V
Part 5: 8. CONNECTOR POSITION AND PIN ARRANGEMENT.
2-10
W6200