Moving The Printer On The Same Floor - Canon W6200 Service Manual

W6200

2.1.1 Moving the printer on the same floor

1) Turn off the [Power] button, and check that the heads are capped.
2) Open the upper cover, and mount the belt stopper.
CAUTION
3) Close the upper cover.
4) Remove the roll holder from the roll holder slot.
5) Remove the interface cable and power cord (ground wire) from the printer.
6) If the printer is mounted on a stand, unlock the casters on the stand.
7) Hold the printer carrying handle at the bottom, and then slowly move the printer.
CAUTION
When mounting the belt stopper, be careful not to move the carriage by
applying too much pressure. If the carriage moves when the heads are
capped, the rubber part of the cap may touch the nozzles on the heads
and damage the printhead.
If the printer is subjected to strong vibrations when it is moved, it can
cause ink leakage or damage to the printhead. Be sure to move the printer
slowly and carefully.
3-5
PART 3 Operations